Engineering I Science I Manufacturing I Media I Health I Sales I Teaching

Osama Mahmoud Elbahrwy
  • Cairo
  • Egypt
  • Mechanical Engineer
Share on Facebook

Osama Mahmoud Elbahrwy's Discussions

i am looking for a job in a big construction project as a mechanical engineer

Started Oct 7, 2013 0 Replies

am looking for a job in a big construction project as a mechanical engineer i have more than 25 years of experience in local and international companies. My e-mail is…Continue

Gifts Received


Osama Mahmoud Elbahrwy has not received any gifts yet

Give a Gift


Osama Mahmoud Elbahrwy's Page

Profile Information

Job Niche Focus or Specialty or Expertise
Mechanical Engineer
Currrent Job Title
mechanical engineer
Post your Resume/CV Summary (4000 words) - This information could be seen by search engines.
Curriculum Vitae

Career Objective:

** To obtain a challenging position in the area of project construction, , steel welding, and steel erection: boilers, tanks, piping & steel structure.

• Name : Eng’r. Osama Mahmoud Abd- Elhamed Elbahrawy
• Date of birth :06th June 1958
• Nationality : Egyptian

• Contact Tel. in Egypt : 00201284592756 / 0020223632585

• Communication postal address: Heliopolis, Cairo, 12 Ismael Ramzy Street,
• Apartment No 11, Cairo, Egypt
• E-mail address:

• Education:

• B.Sc. Degree in Mechanical Engineering – Power Section - in 1982 from Faculty of Engineering, Ain Shams University.
• Level II NDT U-T Ultrasonic inspection. (ASNT)
• Level II NDT P.T Liquid penetrant inspection (ASNT)
• Level II NDT M.T Magnetic particle inspection (ASNT)
• Level II NDT V.I Visual Inspection ( ASNT )

• AutoCAD 3 D training course: from Cairo University.

• Diploma in the specialty of “Heat Treatment” in the Academic year 1992/1993 from Tabbing Institute for Metallurgical Studies (TLMS).

• Training course on “Welding technology, welding metallurgy and non-destructive testing” from “Central Metallurgical Research and Development Institute (CMRDI)”.

• Training course held on “Entrance for Weldment Design” From The Egyptian Engineering Committee.

• Training course held on “Welding Technology For Engineers from Industrial Design Development Center.

From 15.11.2012 to Now

Technical Office Engineer
Working in Libya – Sirt “Thermal Electric Power Station”
My duties could be summarized as:
• Preparing daily progress, weekly and monthly site progress reports.
• Preparations of construction method statements.
• Preparing technical and material submittals.
• Attend progress meetings, discuss and suggest technical proposals.
• Preparation of Material Control System.
• Preparation of Lifting Plans for critical lifting activities.
• Updating all drawings to the site and quality engineers
• Quantity surveying for the erected bolts and steel structure
• Preparing sketched and work shop drawing if needed.

FROM 1.Feb.2011 until 1.12.2011

Technical office engineer In Carlo Gavazzi Egypt (under UDHE as a main contractor) in Piping Project under Supervision of UHDE Co. as a main contractor. The Project is Ammonia / Urea fertilizers in Damietta in Egypt. Our scope is to construct the piping from compressor to turbine
My responsibility is:
• Arranging project scheduling and follow up piping activities ( by Primavera)
• To issue weld maps for all pipelines isometrics.
• Evaluate the daily and weekly site progress, and report to the site manager
• Prepare the as built drawing.
• Coordinate the work with the UHDE site engineer.
• Prepare Layout, and detail drawings for pipe supports. (by AutoCAD)

FROM 16 APRIL2009 UNTILL 1/2/2011

Working with “LEAD CO.”( Under Saipem as main contractor) as Senior Document Controller engineer in the UTBS
“Southern unit for treating the crude oil in “HASSI MASSOUD" ALGEREA.
• Review documents/drawings submitted by the client
• Classify all documents as a hard copies and soft copy
• Preparing the layout for the project
• Preparing the fabrication sequence for the project.
• Supervising for the work shop drawings done by the draftsman
• Review documents/drawings submitted by the client
• Preparing the layout for the project
• Preparing the fabrication sequence for the project.

DURING JUNE 2007 UNTILL March 2009

Working with WINTERSHALL PETROLIUM COMPANY(hired from Bonatti) as “Technical office engineer ”Jahkira” in Libya” Gas Oil Separation Plant (GOSP) and Gas Utility Plant (GUP),
• Review documents/drawings submitted by the client
• Preparing the layout for the project
• Preparing the fabrication sequence for the project.
• Supervising for the work shop drawings done by the draftsman
• Distribute approved fabrication,W.S.D. to Yard ,material control QA/QC
• Preparing the reports and weekly submitted to the client
• Attend to any site problems associated with project and suggest solutions/alternatives
for the client’ approval
• Issue site Queries, follow up, and close out
• I am authorized person for the As-Built signing of all drawings after compilation of the project.

During April 2006 Untill May 2007
Worked with SAFARI Co. Ltd. as “Technical office & site Engineer” in Restoration Piping project in King Abdul Aziz Naval Base in Jubail, Saudi Arabia.
• Prepare drafts and shop drawing for piping plane and pipe supports
• Prepared the welding procedure (W.P.S)) for Carbon Steel Pipes for the application of diesel line.
• Prepared the performance qualification record (P.Q.R).
• Training and qualify 4 (four) welders for 6G position and 1 welder for 1G position
• Supervised the Welding and Radiographic testing for diesel line pipes
• Supervised the fabrication for common support pipelines.
• Supervised the fabrication for Hydraulic pipe line supports

During March 2002 to March 2006

Worked as “technical office & fabrication Engineer”, with “INTERNATIONAL Co. for BOILERS & PRESSURE VESSELS IBSF”
Responsibilities were:
Preparation of route sheets, material estimation, and shop drawings for tanks, pressure vessels, and piping and steel structure.

NOTE: Route sheet is a document indicates the steps of fabrication, and the inspection needed and the hold points, type of material used..Etc.

During Nov. 1997 to Sept. 2001

Worked as “Technical Office Engineer” with KOLALY ENGINEERING Co. in Egypt.

Responsibilities were:
• To prepare the workshop drawing for Steel Structure Buildings; Towers, Bridges or pipe racks
• To prepare the cut sheets for tanks or vessels
• To estimate the material list upon which Purchasing order is released.
• To prepare Bolt list & Bolt plan, Bolt list should be sent to purchasing department.
Bolt plan is sent to erection department
• To prepare Assembly list. Assembly list include: item main size, length, quantity & weight, Assembly list is sent to erection department
Examples for projects, which I participated in:

Niigata project: it was 750 ton steel structure pipe bridges TOYO project: it was a factory for petrochemicals in Sues, in which I prepare the checkered plate platform, workshop drawing for stairs and ladders.
“Ques” Newsprint paper factory project: I prepared the Workshop drawing for the main store building (300 ton) I make a complete revision for wet cleaning Building (250 ton steel structure). I make a complete design for the grating of the recovery Boiler, which was 480 ton steel structure & 40 meter height. The grating weight was about 60 ton.

Also I prepared bolt list, bolt plan, assembly list & material list for many buildings in that factory.

Workshop drawing of the steel structure of Mazout tank. Handrail & stairs workshop drawing for the Mechanical Bulb Building, Chemical bulb building & Recovery boiler building.

During 1996-1997

Worked with “MITSUBISHI HEAVY INDUSTRIES Co.” as a Technical Supervisor, for tank erection for 200 * 5 Mega watts Thermal Electric Power station in Aleppo, Syria.
My duties were:
• To check the material (Bechtel Supplied) incoming of the tanks in the light of the packing list and drawing & to report to my chief about any missed items or incorrect material such as: check the shell course sheets; its thickness; its quantities; its dimension.
• Check the bottom plates & annular plates.
• Check the nozzles, flanges, manholes, bolts, roof steel structure, and all other items
• To supervise erection work such as:
- Assembly of annular plates
- Assembly of bottom plates
- Assembly of shell plate
- Welding sequences
- Visual inspection for welding
- Assembly of roof structure & Roof plate

• Witnessed in all inspection tests such as:
- Air vacuum test for bottom plate welding
- Oil leak test for shell plates welding
- Roundness test inside the tank
- Banding test inside the tank with a vertical sweep board.
• Plumpness test inside the tank
• Liquid penetrate test for annular plates welding
• Preparation for water filling test for the tanks.

1987-1995 Nasr Boiler Co. & Babcock & Wilcox Co.

• The field of work is manufacturing and erection of:
- Pressure Vessels
- Fire tube boilers
- Water tube boiler
- Heat exchangers
- Oil tanks

• As a Production control Engineer in the workshop
I was responsible for the following activities:
- Distribute the new revisions of engineering drawing on the different work centers and cancels the old revisions.
- Arrange The Time Schedule( using the Primavera)
- Material list & the Inspection Plan
- Release material from stores & distribute tasks for different work centers: [cutting - edge preparation - rolling – lathing m /c’ s
- Assembly & welding
- I follow up all manufacturing stages
- I coordinated with Quality Control Department with Guidance of the Inspection Plan
- Before I request the Q.C I make pre- inspection (if possible) such as:
- Dimension check
- Nozzle opening marking
- Check opening Dim
- Check shell dimension
- Check – assembly
- Check-Welding visual inspection
- From I work as a Teacher in Technical school

1982 – 1986 : I served in the Egyptian Army as an Officer, In addition to my responsibilities in managing and Administration task, I was also responsible for technical leveling for technical military students

Computer Skills:

• AutoCAD 2, 3 D
• •
Pick a Job Board based on your Specialty

Osama Mahmoud Elbahrwy's Photos

  • Add Photos
  • View All

Comment Wall

  • No comments yet!

You need to be a member of to add comments!



Jobs on

Job Boards - welding, welder, cwi chemistry, chemical engineering materials science, metallurgy,
polymer science, ceramics physics, physicist manufacturing, production genetics, gene research math, mathematics, computer science mines, mining, metals inspection, quality, inspector journalism, media, tv, radio mechanics meterology, weather automotive, auto industry fisheries journeyman, mechanic instrumentation mechanical engineering computer science foundry, casting machining, machinist tech support industrial engineering cae, computer aided engineering leather industry petrochemical statistics engineering, engineer refrigeration, hvac science, sciences electrician, electrical, engineering electronics, engineering forestry, forest hvac, air conditioning robotics, mechantronics textiles, textile engineering dairy industry human resources, hr, recruiter sales, marketing purchasing, supply chain, buyer history, arts loans, banking, mortgage medical, medico home aide, nursing medicare,billing freelancer, freelance communication millwrights, skill trades pharmaceutics, pharma patent attorney, lawyer pharmacy, pharma temps, temporary education, teaching, faculty physiotherapy, physical therapy transportation, logistics branding, brand management counselor, college counselor dentist, dentistry museum, curator sociology, sociologist appliance social network, media volunteer, non profit project management cheerleading, coaching hair stylist contractors finance, banking dental hygienist program management cosmetics, fashion entrepreneur, franchise underwriting, insurance jewelry apps, app development

© 2019   Created by Suresh, CEO   Powered by

Badges  |  Report an Issue  |  Terms of Service